Rms-technologies IMDE17 INTEGRATED MOTOR + DRIVER + ENCODER Manual do Utilizador descarregar pdf (Página 13)

RMS Technologies Page 13 Version 1.04

IMD17/IMDE17 10/1/2007

8. TROUBLESHOOTING

The Motor is in Holding Position, but does not rotate.

This means that Power is being supplied to the driver and motor, so the power supply is

OK. However, the signal generator might be causing the problem. Try changing the

signal to TTL. If this doesn't help, is the external +5 VDC Power connected? Is Pin 4

(disable) touching Pin 7 (logic ground)? This will disable the driver from running.

The Microstepping does not always change to the correct step resolution.

Changing the microstepping "on the fly" might ruin the driver. It is recommended to

disable the motor from running (either turn power off, or use the disable pin), then

change the step resolution.

1 2 ... 8 9 10 11 12 13

Sem comentários

Rms-technologies IMDE17 INTEGRATED MOTOR + DRIVER + ENCODER Manual do Utilizador Página 13